گروه محصولات ضد آتش

چسب ها


فوم های پلی اورتان

سیستم های پوششی و لایه ها ی ضد آب کننده

پاک کننده ها

تعمیر ماشین آلات و نگهداری آنها

نگهداری و محافظت ماشین آلات صنعتی


رنگهای فشاری

لوازم جانبی و ملحقات

Next Product PS257 Pipe Sealant (With Teflon) Previous Product PS253 Pipe Sealant Medium Strength

HP242 Pipe Sealant (High Pressure)
HP242 Pipe Sealant (High Pressure)

Akfix HP242 is an easily applied anaerobic low viscosity pipe sealant used in hydraulic & pneumatic fittings with diameters up to 50 mm and servomechanisms.

HP242 Pipe Sealant (High Pressure)

Product Information

  • Does not shrink when fully cured.
  • Shows great resistance to high pressure, vibration, solvents, heat up to 150°C, moisture,and corrosion.
  • Easly applied to hydraulic & pneumatic fittings with diameters up to 50 mm and servomechanisms.
Applications Area
  • Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
  • Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
  • Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
  • Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
  • For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 150°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
S.Code P.Code Type Volume BoxQty B.Pallet Barcode
HP242_01 - Pipe 50 ml 120 - -
HP242_02 - Pipe 250 ml 36 - -