Select Languages

Properties

• Formulated to lock all metric and imperial nuts and bolts
• Prevents vibration loosening and leakage through the threads
• Slightly oil tolerant; it will bond some ‘as received’ parts, but best results are obtained with clean substrates.
• The thixotropic nature of the product prevents run off, dripping and migration after assembly.
• Typically used on mounting bolts, housing screws, etc.
• Prevents corrosion of assembled parts.

Applications Area

• Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
• Apply the adhesive with a 360 turn to leading threads of the male and female fittings.
• Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
• Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
• For disassembly, use hand tools to remove mating parts. When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

Package